Lonking 3 Ton Wheel Loader
Lonking CDM833 wheel loader | Lonking CDM833 front end loader | Lonking loader
|
Bucket Capacity |
1.7m³ |
|
Rated Payload |
3000kg |
|
Operating Weight |
10300(10500)±300 |
|
Breakout Force |
170±3kN |
Lonking CDM833 wheel loader | Lonking CDM833 front end loader | Lonking loader
Lonking 3 ton front end payloader is a kind of earthmoving machine for multi-working conditions, configured with different attachments, Lonking Lonking front end loaders are able to be used in multi-working conditions, such as construction sites, sand and stone mining working conditions, round wood transmit and loading with the wood fork, etc.
Lonking 3T front end loader adopts a longer wheelbase up to 2850mm and a bigger machine length, the gravity center backshift to reduce the front axle load of the wheel loader, achieved the improvement of traction and breakout force and the reduction of failure rate. The overall backward shift of the center of gravity of the loader also effectively solves the problem that the rear wheels are off the ground when fully loaded and effectively improves the stability of the machine during exercise and operation.
|
BASIC |
1 |
Bucket Capacity |
1.7m³ |
|
2 |
Rated Payload |
3000kg |
|
|
3 |
Operating Weight |
10300(10500)±300 |
|
|
4 |
Breakout Force |
170±3kN |
|
|
5 |
L×W×H |
7200(7450)×2500×3180 |
|
|
ENGINE |
6 |
Maker/Model |
WEICHAI/WP6G125E22 |
|
7 |
Rated Power |
92kW/2200rpm |
|
|
8 |
Displacement |
6L |
|
|
9 |
Air Cleaner |
Three Stage Air Cleaner |
|
|
DRIVE TRAIN |
10 |
Transmission Type |
Planetary Powershift |
|
11 |
Shift Type |
Mechanical Powershift Control |
|
|
12 |
Rear Axle Oscillation (°) |
±10° |
|
|
13 |
Main Reducer |
Spiral Bevel,1-stage Reduction |
|
|
14 |
Final Reducer |
Planetary Reduction |
|
|
STEERING SYSTEM |
15 |
Type |
Hydraulic Load Sensing System/Hydraulic Load Sensing System |
|
16 |
Pump |
138L/min·2200rpm |
|
|
17 |
System Pressure |
14MPa |
|
|
18 |
Cylinder Type |
Double Acting |
|
|
19 |
Steering Angle |
±35° |
|
|
HYDRAULIC SYSTEM |
20 |
Type |
Joystick Control (Single-lever) |
|
21 |
Control Valve |
2 Spool |
|
|
22 |
System Pressure |
16MPa |
FAQ：
1. Which type of payloader with a fork do you suggest for the round wood loading?
The wheel loader with a fork for round wood loading and unloading depends on the density & diameter of the wood. Normally we suggest on the 3 ton and 5 ton wheel loader with a fork for different wood types.
2. How long will you deliver the wheel loading machine after the PO?
We will deliver the wheel loader in about 20-25 working days after the deposit according to the type of the wheel loader and the quantity that is purchased.
3. How will you transport the wheel loader, please?
The transportation of the wheel loader will be different according to the destination country and the PO quantity. Container transport will be a better option if the PO quantity is not so big. We will choose the best option for the customers according to the different orders.
